Free User Manual

This a Map For Printer Resetter Software Download

HP Deskjet D1360 Printer Review

Ideal for the basic home user or small office, the Deskjet D1360 is an ultra-
compact, affordable, easy-to-use printer designed to print laser-quality black
text documents as well as colorful home and family projects.

The compact
size of the HP Deskjet D1360 printer conveniently fits in small spaces and
delivers fast efficient print speeds of up to 16 pages per minute (ppm) in black
and up to 12 ppm in color. Users can effortlessly share, save and print vibrant
photos using the included HP Photosmart Express software

more here

Cara mereset Canon ip1880

download resetter for Canon ip1880
download here
http://rapidshare.com/files/79771944/ip1880.rar

Epson R240 service manual

1. Switch on printer
2. Set the date to 15 February 2006
3. Run adjprog.exe from the extracted folder
4. Click accept
5. Click particular adjustment mode
6. Go to maintenance then Select waste ink pad counter then click ok
7. Click on "check button till its done then click on initialization button then click on finish button
8. Switch off printer for 5secs then switch on again
9. After you reset succesfully, you can change the date back to normal

Download here
http://www.mediafire.com/?2jmomd3ln1z

Resetting the Hewlett Packard C5010A

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used in the OfficeJet D Series:
1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Press the < and > (also the + and -) at the same time, then release quickly (the lcd panel must be showing the date or the procedure will not work)

3. On the keypad, press in order 4,5, 6.
4. A message will appear asking if you want to override the ink level gauge. Press 1 for yes (You can later turn the ink gauge back on if you install a new cartridge by going through steps 2 and 3, then pressing 2 when prompted if you want to override the ink level gauge).
Your ink level gauge is now turned off and can resume printing.

To turn the ink level gauge off for the HP C5010A (#14) color cartridge used in the HP Color InkJet CP 1160 Series:

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Press and hold down the power button.
3. While holding the Power button:
Press the Cancel button 12 times
Press the Resume button 3 times
4. Release the Power button

The ink gauge is now off and you can resume printing

To reset the HP C6657A (#57) or HP C8728A (#28)

To reset the HP C6657A (#57) or HP C8728A (#28):
1. Refill your cartridge using your Mr. Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering the only the blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 2:

If Reset Method 1 did not work on your printer, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.

How To Reset HP C6578 Printer

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Following the diagram at right, place a piece of adhesive tape covering the Click here to enlarge only the four blue colored contacts (a contact is the individual copper square). Make sure that only those four are covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Remove the tape from the four blue contacts. Place the tape over the four red colored contacts. Make sure that only those four are covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 2:

1. Refill your cartridge using your Mr. Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering the only the blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Reset Method 3:

If neither of the reset methods above worked, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.

Resetting the Hewlett Packard C5011A

To turn the ink level gauge off for the HP C5011A (#14) black cartridge used in the OfficeJet D Series:

1. Refill your cartridge using your Mr. Ink Jet refill kit.HP Officejet D145
2. Press the < and > (also the + and -) at the same time, then release quickly (the lcd panel must be showing the date or the procedure will not work)
3. On the keypad, press in order 7, 8, 9.
4. A message will appear asking if you want to override the ink level gauge. Press 1 for yes (You can later turn the ink gauge back on if you install a new cartridge by going through steps 2 and 3, then pressing 2 when prompted if you want to override the ink level gauge).

Your ink level gauge is now turned off and can resume printing.

To turn the ink level gauge off for the HP C5011A (#14) black cartridge used in the HP Color InkJet CP 1160 Series:
1. Refill your cartridge using your Mr. Ink Jet refill kit.HP Color Inkjet cp1160
2. Press and hold down the power button.
3. While holding the Power button:
Press the Cancel button 12 times
Press the Resume button 1 time
4. Release the Power button
The ink gauge is now off and you can resume printing

Resetting the HP C6656A

1. Refill your cartridge using your Mr. Ink Jet refill kit.

2. Following the diagram at right, place a piece of adhesive tape covering the only the light blue colored contact (a contact is the individual copper square). Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Leave the tape from blue contact on the cartridge. Place another piece of tape over the red colored contact. Make sure that only that contact is covered and no others. *Please note that the contacts shown are colored for illustrative purposes only. You will not have blue or red contacts on your cartridge.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

Intruction To reset the HP 51645 or HP C6115

To reset the HP 51645 or HP C6115:

1. Refill your cartridge using your Mr. Ink Jet refill kit.
2. Following the diagram at right, place a piece of adhesive tape covering the HP 45 printhead, contacts, resetting the 51645aonly the four blue colored contacts (a contact is the individual copper square). Make sure that only those four are covered and no others.

3. Place cartridge in the printer. The printer may tell you that there is a problem with your cartridge. Ignore this message. The printer may print an alignment page. If so, allow it to do so.

4. Take the cartridge out of the printer. Remove the tape from the four blue contacts. Place the tape over the four red colored contacts. Make sure that only those four are covered and no others.

5. Follow step 3 again.

6. Take the cartridge out of the printer for the final time. Take the remaining tape off and place back in the printer. The printer should print out an alignment page and the estimated ink level in the toolbox should read full.

If Reset Method 1 did not work on your printer, go through the same procedure again, but this time using the green colored contacts in step 2 and the brown colored contacts in step 4. This method is more commonly used for the #15 or in the later officejet printers.

If neither of the reset methods above worked, you can cycle cartridges through to reset the level. You will need two extra cartridges and the one you refilled. First, put the refilled cartridge in the printer. Allow it to recognize the cartridge and print an alignment page. Take that cartridge out and place in the first extra cartridge. Allow it to recognize and print an alignment page. Take the first extra cartridge out and place the second extra cartridge in. Allow it to recognize and print an alignment page. Take the second extra cartridge out. Place the refilled cartridge back in the printer. It will print an alignment page and then the estimated ink level will be reset to full.

HP Laserjet Error Codes 13.99 PAPER JAM LOCATION

1. Remove jammed media from the specified location.
2. Verify the paper tray is fully closed.
3. Inspect and/or replace the feed and separation rollers.
4. Ensure there is no obstruction in the path, such as a torn piece of paper.
5. Open and close the top cover to clear the message.
6. Check sensors and flags for proper operation

HP Laserjet Error Codes 13.21 DOOR OPEN JAM

1. Check the transfer roller and small media belt to ensure they are operating and can feed print media.
2. Check the paper path for obstructions at the transfer roller, toner cartridge, paper feed assembly, and fuser.
3. Replace any defective sensors or flags.
4. Turn the media stack over and/ or rotate it by 180° in the input tray.

HP Laserjet Error Codes 13.6 PAPER JAM CHECK REAR DOOR

1. Check the paper path for obstructions at the fuser and output/delivery area.
2. Replace any defective sensors or flags.

HP Laserjet Error Codes 13.20 PAPER JAM CHECK REAR DOOR

1. Remove all media in the paper path, and then open and close the top cover.
2. If the message persists after all media is removed: Check if media is jammed in the prefeed area. Replace any defective sensors or flags

Laserjets 5P, 6P, 2100, 2200 and other printers

Laserjets 5P, 6P, 2100, 2200 and other printers that do not have a display panel (LEDs only).
These models are designed as low volume personal printers and do not have a maintenance count that needs to be reset or a readily accessible service mode. You can cold reset these printers or completely reinitialize the NVRAM (nonvolatile ram) to factory defaults. Cold resetting will reset most of the system parameters to factory defaults and reinitializing the NVRAM will reset ALL system parameters to the factory defaults. Also, there is a service mode for these printers but it is only accessible through software using PJL service mode commands. Buy the printer's service manual if you want to learn more.

HP Laserjet 5L, 6L, 1100, 1200 do not have a service mode. You can only perform a cold-reset and continuous self-test.

Multifunction printers - printers/copiers/fax/scanners (e.g. HP 3100, 3150, 3200, etc.)
Service modes in these printers are more extensive because of the scanning and faxing features. We recommend buying the service manual for these units if you will be doing any repairs beyond mechanical components.

HP Laserjet Error Codes 13.2 PAPER JAM OPEN INPUT TRAYS

1. Check the input area for obstructions such as paper in the path. Also check to see if the registration assembly is damaged or if the transfer roller is out of place. 2. Replace any defective sensors or flags.
3. Ensure the media does not exceed the maximum length.
4. If multiple sheets are feeding, it might be necessary to fan the media and reduce the stack height. Also, replace separation pad.
5. Verify that the fuser is properly installed.

HP Laserjet 5 series service mode

1. Hold down the Menu+ and Value+ keys while powering on the printer. Hold the keys down until SERVICE MODE is displayed.
2. The interrupted power-on self test is resumed. If the test completes successfully, the message SERVICE MODE is displayed.
3. To exit service mode, press the Go button.

3.0 PAPER JAM HP Laserjet Error Codes

This A non-specific paper jam occurred.
solution

1. Remove jammed media from the specified location. 2. Verify the paper tray is fully closed. 3. Inspect and/or replace the feed and separation rollers. 4. Ensure there is no obstruction in the path, such as a torn piece of paper. 5. Open and close the top cover to clear the message. 6. Check sensors and flags for proper operation.

HP Laserjet Error Code 13.XX PAPER JAM

Media is jammed at the specified location (and possibly at other locations). If the message persists after all jams have been cleared, a sensor or sensor lever might be stuck or broken.

Fix
For all jam messages, do the following:
1. Remove jammed print media from the specified location. Check the entire paper path for other pieces of media in the path.
2. Open and close the top cover to clear the message.
3. Check sensors and flags in the paper path for proper operation.

HP Laserjet 5000 series service mode

Guide for HP Laserjet 5000 series service mode
1. Hold down [Select] and [Cancel Job] while turning on the printer.
(If the control panel reads INITIALIZING, the keys were released too soon.)
2. Press the right side of the [Menu] key, then press [Select]. The message SERVICE MODE is displayed.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press [Go].

HP Laserjet 4V and 4MV service mode

1. Hold down the [On Line], [Form Feed], and [Enter] keys while powering ON the printer, until all lights are illuminated and the Display Window is blank. (If the Display Window reads 05 SELF TEST at this point, the keys were released too soon. Repeat this step until successful.)
2. Press the [Form Feed] key, then the [Enter] key. The message SERVICE MODE is displayed briefly, then the printer automatically begins a 05 SELF TEST.
After several seconds, both Control Panel Indicators turn OFF. (The printer may display 02 WARMING UP if it has not warmed up completely.) After the printer has warmed up and passed the self test, SERVICE MODE is displayed.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press the [On Line] key.

HP Laserjet 5si service mode

1 Hold down [Items] and [+] while powering ON the printer, until all lights are illuminated and the Display is blank. (If the Display Panel reads INTERNAL TEST at this point, the keys were released too soon. Repeat this step until successful.)
2 Press [Select]. The message SERVICE MODE is displayed briefly, then the printer automatically begins an INTERNAL TEST. After several seconds, both Control Panel Indicators turn OFF. (The printer may display WARMING UP if it has not warmed up completely.) After the printer has warmed up and passed the self test, SERVICE MODE is displayed.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press [On Line].

HP Laserjet 8000, 8100, and 8150 Series service mode

1. Hold down SELECT and JOB CANCEL while powering on the printer, until all lights are illuminated and the Display is blank. (If the Display Panel reads INTERNAL TEST at this point, the keys were released too soon. Repeat this step until successful.)
2. Press MENU, then SELECT. The message SERVICE MODE is displayed briefly, then the printer automatically begins an INTERNAL TEST. After several seconds, both Control Panel Indicators turn off. (The printer may display WARMING UP if it has not warmed up completely.) After the printer has warmed up and passed the self test, SERVICE MODE is displayed.
3. Press MENU once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
To exit the Service Mode press GO.

resetter printer Canon iP1000 Waste Ink Counter Reset Manual for Service mode

Waste Ink Counter Reset Manual for Service mode
Step 1:
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

Step 2 :
Software for Permanant (1st method)
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1000"

Reset Printer Canon iP1700/1300

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal.

Resetting Ink Counter Level on Canon Pixma iP1600

- the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
- When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
- When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
- When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.

The number of the Reset button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
regards

HP Laserjet Error Codes 13.14

For Laserjet 5si. This error is caused by a defective paper control PCA

Replace paper control PCA.

13.10 PAPER JAM CHECK DUPLEXER

1. Check the duplexer and the rear area of the printer for obstructions or damage. 2. Check the duplexer for proper operation. Replace the duplexer if a sensor is defective.

HP Laserjet 4100 series service mode

1 While turning on the printer, hold down SELECT and CANCEL JOB until all of the lights on the control panel are lit.
2 Press the right side of the MENU key, then press SELECT. The message SERVICE MODE temporarily appears and will reappear when the printer completes the initialization process.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
5. To exit the service mode, press GO.
Note: If READY appears in the control panel, the keys might have been released too soon, or the wrong keys were pressed.

HP Laserjet 4000 and 4050 series service mode

HP Laserjet 4000 and 4050 series service mode
1 Hold down [Select] and [Cancel Job] while turning on the printer until all of the lights on the Control Panel are lit. (If the Control Panel reads INITIALIZING, the keys were released too soon.)
2 Press the right side of the [Menu] key, then press [Select]. The message SERVICE MODE is displayed.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
5. To exit the Service Mode press [Go].

Service Epson R270

For epson R270 user, if you need epron R270 resetter any two alternative resetters can be use to reset Epson R270 Printer, that is adjustment program epson R270 or SSCServe.

If You want to service epson R270 using Adjustment Program Epson R270 don’t forget to change date setting in your computer to 18 January 2008. This setting is used to run adjustment program R270 without error. Procedure using this adjustment program like using adjustment program for epson C58, C79 or C90 (can be seen here)

If you want to reset Epson R270 using SSC Service utility, there no setting must be altered. You is only have to compare to SSC service utility setting with your printer. Procedure to use this software look here.

Resetting Waste Ink Counter Printer Canon Pixma iP 1880

There are some ways to reset waste ink counter in the Canon Pixma iP 1880. Waste Ink counter have full at Canon Pixma iP 1880 marked with The POWER and ALARM lamps flash alternately. If waste Ink have full the printer cannot be used. So, the printer will be able to be used again after reset. You are can use software resetter like GeneralTool or iPTool to reset Canon Pixma iP 1880, you can also do reset manual. Following its way to reset Canon Pixma iP 1880 :

A. Reset Manual.

On reset manual, sometime printer return blinking after turn on again. For reset manual following its way :

* Turn the printer on
* Press and hold Resume button for 1-2 minutes
* Open the printer cover
* Release the catridge and then put catridge again
* Close The Cover
* Turn Off then Turn On again.

B. Using GeneralTool for canon pixma ip 1800 series

Before using GeneralTool for canon pixma ip 1800, printer driver should have been install correcly in the computer.

Using GeneralTool iP 1800...? why do not use GeneralTool iP 1880. Canon Pixma iP 1880 is canon iP 1800 series. Follow this intruction to reset the printer :

* Download software resetter for canon pixma iP1880 from Here
* Before connecting printer to the power suply, press and hold power button then connecting the printer to the power.
* dsacme.blogspot.com
* While hold the power button press reject button for 2 times then release power button.
* Run general tool for canon iP 1880. After the printer know, Click lock release button. ( note : to view locK release menu, min resolution 1024 x 728).
* Then select Set Destination to iP1800 (my canon iP 1880 printer is iP1800ASA)
* Click MAIN and PLATEN button to reset waste ink counter to zero.
* Finally test print by click TEST PATTERN button.

C. Using iPTool software

This is software from Rusia for canon iP series. Using this software give separate experience. this software detect automatically attached printer in the computer. following way reset to use iPTool software :

* Download and ektrak iPtool software, you can download the software from this url :
* Turn on the printer
* Then run iptool software, the software will detect the printer automatically.
* To reset waste ink counter to zero click “Reset Main” and “Reset Platen” button.
* To view the result do test print.

Download HP Business Inkjet 1000 Drivers

Do not turn off printer or unplug printer cable when printer setup program is running during hardware-first installation

If you have connected the USB cable to your printer and turned on the printer, do not turn off the printer or unplug the cable from the printer when the printer setup program is running. If you do so, the setup program will not go to completion.

Unable to create printer using setup program after Plug-and-Play installation on Windows systems

The printer setup program may fail to detect the printer if it has already been installed using Plug-and-Play without going through the setup program. The setup program will not go to completion.

To resolve this, select the Cancel button to exit from the setup program, then run the setup program again and select an unused port.

If you just wish to install other components (such as Toolbox or user’s guide), choose not to install the driver when running the setup program.

Unable to continue printer software installation without physically connecting printer

If you wish to install the printer by going through a direct connection using a USB cable, you must physically connect the printer to the computer when prompted by the setup program. If you do not connect the printer, the setup program will not go to completion.

If you wish to install the printer software without connecting the printer, select any port (such as a COM port) from the Other Port drop-down list. After installation, associate the printer to a USB port in the printer properties dialog box.

Unable to install printer software using customized installation package

If you plan to create customized installation packages and run it on the PC without the printer connected, please do the following:

· When creating the installation package, select COM port under the Others Option with a list of available ports in the Connector Type dialog.

· Run the installation package on the computer.

· After installing the printer software, connect the printer and change the Port setting to USB.

Note: Ensure that the printer name and the name of the shared printer specified in the customized installation package do not exist on the installation system.

Unable to do Plug-and-Play installation from Windows to Novell

The printer setup program will fail to detect the printer if you try to do a Plug-and-Play installation to a Novell server through a USB port. The setup program will not go to completion.

To resolve this, select any port (such as a COM port) from the Other Port drop-down list. After installation, associate the printer to a USB port in the printer properties dialog box.

Unable to install printer driver using Novell NDPS printer manager on some Windows systems

If you have installed Novell client service pack 3.32sp1 on Windows 98 or 4.83sp1 on Windows 2000 or NT, an error message will appear when you try to install the printer driver using Novell NDPS printer manager.
To resolve this, install the driver using the Add Printer method.
Novell Point-and-Print does not work with Windows 98 and Windows 2000.

Use the Add Printer Wizard to install the printer driver:
1. Go to the Printers folder.
2. Double-click the Add Printer icon.
3. In the Add Printer dialog box, select the Network Print Server option.
4. Browse to the appropriate NDS or bindery queue.

For Windows 98, you can also use the following alternative:
1. Use the HP File Expansion utility on the Starter CD’s \Utils\Expand folder to uncompress the Windows 98 driver to a temporary location on your hard disk.
2. Use the driver in this temporary location to set up Novell Point-and-Print.

Unable to print on Windows 2000 and XP clients after installing (kernel mode) driver from Windows NT 4.0

Users will be prompted for the printer driver when they try to print after installing the (kernel mode) driver from Windows NT 4.0 by doing a point-and-print.

This is because Windows 2000 and Windows XP cannot print using the Windows NT 4.0 kernel mode driver.

To resolve this, administrators need to install the user mode driver for Windows 2000 and Windows XP on the Windows NT 4.0 server.

To install Windows 2000 and Windows XP user mode driver on Windows NT 4.0 server:
1. In the driver properties dialog box on the server, click the New Driver button on the General tab.
2. When prompted for files, locate the Windows 2000 and Windows XP folder on the printer Starter CD and select the user mode driver.

Installation through network fails to locate certain files on some Windows systems
If you are installing the printer through the network and the network path that you provided (when prompted) is very long, installation will fail to locate some installation files.

This is a limitation of the operating system. It can support only a limited number of characters in the full path (including filename) that you specify.

Reboot is required after installation on some Windows systems
When prompted, please reboot your system after installation.

HP Laserjet Error Codes 13.1 PAPER JAM OPEN INPUT TRAYS

This Paper-delay jam at paperfeed area.
how to solve

1. Ensure that paper trays are loaded and adjusted properly so media can feed from the tray. It might be necessary to reduce the stack height of media in the tray. 2. Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media meets the specifications. 5. Check the pickup feed and separation rollers for unusual wear. Replace as needed. 6. Rotate the media in the input tray by 180° and/or turn it over

HP Laserjet 4 and 4 plus series service mode

1. Hold down the [On Line], [Form Feed], and [Enter] keys while powering ON the printer, until the ON LINE and FORM FEED indicators are both illuminated and the Display Window is blank. (If the Display Window reads 05 SELF TEST at this point, the keys were released too soon. Repeat this step until successful.)
2. Press the [Form Feed] key, then the [Enter] key. The message SERVICE MODE is displayed briefly, then the printer automatically begins a 05 SELF TEST. After several seconds, the ON LINE and FORM FEED lights turn OFF.
(The printer may display 02 WARMING UP if it has not warmed up completely.) After the printer has warmed up and passed the self test, SERVICE MODE is displayed.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
5. To exit the Service Mode press the [On Line] key.