For epson R270 user, if you need epron R270 resetter any two alternative resetters can be use to reset Epson R270 Printer, that is adjustment program epson R270 or SSCServe.
If You want to service epson R270 using Adjustment Program Epson R270 don’t forget to change date setting in your computer to 18 January 2008. This setting is used to run adjustment program R270 without error. Procedure using this adjustment program like using adjustment program for epson C58, C79 or C90 (can be seen here)
If you want to reset Epson R270 using SSC Service utility, there no setting must be altered. You is only have to compare to SSC service utility setting with your printer. Procedure to use this software look here.
Service Epson R270
Resetting Waste Ink Counter Printer Canon Pixma iP 1880
There are some ways to reset waste ink counter in the Canon Pixma iP 1880. Waste Ink counter have full at Canon Pixma iP 1880 marked with The POWER and ALARM lamps flash alternately. If waste Ink have full the printer cannot be used. So, the printer will be able to be used again after reset. You are can use software resetter like GeneralTool or iPTool to reset Canon Pixma iP 1880, you can also do reset manual. Following its way to reset Canon Pixma iP 1880 :
A. Reset Manual.
On reset manual, sometime printer return blinking after turn on again. For reset manual following its way :
* Turn the printer on
* Press and hold Resume button for 1-2 minutes
* Open the printer cover
* Release the catridge and then put catridge again
* Close The Cover
* Turn Off then Turn On again.
B. Using GeneralTool for canon pixma ip 1800 series
Before using GeneralTool for canon pixma ip 1800, printer driver should have been install correcly in the computer.
Using GeneralTool iP 1800...? why do not use GeneralTool iP 1880. Canon Pixma iP 1880 is canon iP 1800 series. Follow this intruction to reset the printer :
* Download software resetter for canon pixma iP1880 from Here
* Before connecting printer to the power suply, press and hold power button then connecting the printer to the power.
* dsacme.blogspot.com
* While hold the power button press reject button for 2 times then release power button.
* Run general tool for canon iP 1880. After the printer know, Click lock release button. ( note : to view locK release menu, min resolution 1024 x 728).
* Then select Set Destination to iP1800 (my canon iP 1880 printer is iP1800ASA)
* Click MAIN and PLATEN button to reset waste ink counter to zero.
* Finally test print by click TEST PATTERN button.
C. Using iPTool software
This is software from Rusia for canon iP series. Using this software give separate experience. this software detect automatically attached printer in the computer. following way reset to use iPTool software :
* Download and ektrak iPtool software, you can download the software from this url :
* Turn on the printer
* Then run iptool software, the software will detect the printer automatically.
* To reset waste ink counter to zero click “Reset Main” and “Reset Platen” button.
* To view the result do test print.
Download HP Business Inkjet 1000 Drivers
Do not turn off printer or unplug printer cable when printer setup program is running during hardware-first installation
If you have connected the USB cable to your printer and turned on the printer, do not turn off the printer or unplug the cable from the printer when the printer setup program is running. If you do so, the setup program will not go to completion.
Unable to create printer using setup program after Plug-and-Play installation on Windows systems
The printer setup program may fail to detect the printer if it has already been installed using Plug-and-Play without going through the setup program. The setup program will not go to completion.
To resolve this, select the Cancel button to exit from the setup program, then run the setup program again and select an unused port.
If you just wish to install other components (such as Toolbox or user’s guide), choose not to install the driver when running the setup program.
Unable to continue printer software installation without physically connecting printer
If you wish to install the printer by going through a direct connection using a USB cable, you must physically connect the printer to the computer when prompted by the setup program. If you do not connect the printer, the setup program will not go to completion.
If you wish to install the printer software without connecting the printer, select any port (such as a COM port) from the Other Port drop-down list. After installation, associate the printer to a USB port in the printer properties dialog box.
Unable to install printer software using customized installation package
If you plan to create customized installation packages and run it on the PC without the printer connected, please do the following:
· When creating the installation package, select COM port under the Others Option with a list of available ports in the Connector Type dialog.
· Run the installation package on the computer.
· After installing the printer software, connect the printer and change the Port setting to USB.
Note: Ensure that the printer name and the name of the shared printer specified in the customized installation package do not exist on the installation system.
Unable to do Plug-and-Play installation from Windows to Novell
The printer setup program will fail to detect the printer if you try to do a Plug-and-Play installation to a Novell server through a USB port. The setup program will not go to completion.
To resolve this, select any port (such as a COM port) from the Other Port drop-down list. After installation, associate the printer to a USB port in the printer properties dialog box.
Unable to install printer driver using Novell NDPS printer manager on some Windows systems
If you have installed Novell client service pack 3.32sp1 on Windows 98 or 4.83sp1 on Windows 2000 or NT, an error message will appear when you try to install the printer driver using Novell NDPS printer manager.
To resolve this, install the driver using the Add Printer method.
Novell Point-and-Print does not work with Windows 98 and Windows 2000.
Use the Add Printer Wizard to install the printer driver:
1. Go to the Printers folder.
2. Double-click the Add Printer icon.
3. In the Add Printer dialog box, select the Network Print Server option.
4. Browse to the appropriate NDS or bindery queue.
For Windows 98, you can also use the following alternative:
1. Use the HP File Expansion utility on the Starter CD’s \Utils\Expand folder to uncompress the Windows 98 driver to a temporary location on your hard disk.
2. Use the driver in this temporary location to set up Novell Point-and-Print.
Unable to print on Windows 2000 and XP clients after installing (kernel mode) driver from Windows NT 4.0
Users will be prompted for the printer driver when they try to print after installing the (kernel mode) driver from Windows NT 4.0 by doing a point-and-print.
This is because Windows 2000 and Windows XP cannot print using the Windows NT 4.0 kernel mode driver.
To resolve this, administrators need to install the user mode driver for Windows 2000 and Windows XP on the Windows NT 4.0 server.
To install Windows 2000 and Windows XP user mode driver on Windows NT 4.0 server:
1. In the driver properties dialog box on the server, click the New Driver button on the General tab.
2. When prompted for files, locate the Windows 2000 and Windows XP folder on the printer Starter CD and select the user mode driver.
Installation through network fails to locate certain files on some Windows systems
If you are installing the printer through the network and the network path that you provided (when prompted) is very long, installation will fail to locate some installation files.
This is a limitation of the operating system. It can support only a limited number of characters in the full path (including filename) that you specify.
Reboot is required after installation on some Windows systems
When prompted, please reboot your system after installation.
HP Laserjet Error Codes 13.1 PAPER JAM OPEN INPUT TRAYS
This Paper-delay jam at paperfeed area.
how to solve
1. Ensure that paper trays are loaded and adjusted properly so media can feed from the tray. It might be necessary to reduce the stack height of media in the tray. 2. Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media meets the specifications. 5. Check the pickup feed and separation rollers for unusual wear. Replace as needed. 6. Rotate the media in the input tray by 180° and/or turn it over
HP Laserjet 4 and 4 plus series service mode
1. Hold down the [On Line], [Form Feed], and [Enter] keys while powering ON the printer, until the ON LINE and FORM FEED indicators are both illuminated and the Display Window is blank. (If the Display Window reads 05 SELF TEST at this point, the keys were released too soon. Repeat this step until successful.)
2. Press the [Form Feed] key, then the [Enter] key. The message SERVICE MODE is displayed briefly, then the printer automatically begins a 05 SELF TEST. After several seconds, the ON LINE and FORM FEED lights turn OFF.
(The printer may display 02 WARMING UP if it has not warmed up completely.) After the printer has warmed up and passed the self test, SERVICE MODE is displayed.
3. Press [Menus] once to display SERVICE MENU.
4. Once it says SERVICE MENU press ITEM to scroll through service mode items.
5. To exit the Service Mode press the [On Line] key.
Subscribe to:
Posts (Atom)